The 10.0.0.0.1 is a mistyped wrong IP address that someone types when they add an extra zero in the URL; ideally, the correct keyword is 10.0.0.1 and is used as the default gateway address for Xfinity router admin settings and few other router brands. This IP address is also referred to as a router IP, which falls under the private Class -A IP address range.
However, note that special from 10.0.0.1, you would find various IP addresses that routers use as their error gateway, like 192.168.0.1 and 10.1.10.1. At times it usually gets tough to remember your Wi-Fi network name, also known as SSID. Further, it is normal for you to change the password from time to time for security reasons. The easiest way to do that is to know correctly about 10.0.0.1. So let’s change how important it is to know about 10.0.0.1.
In simple terms, the IP addresses are labels that are used to identify the devices on a specific network. Having an IP address permits a device to communicate and connect with other devices in a network that is based on IPs. It is important here to note that your Internet Service Provider or ISP gets IP addresses from regional internet registries. This also implies that you don’t connect to the internet directly. You are usually connected to a network, and that network permits you to access it.
What can you change with 10.0.0.1?
In case you are unable to find the username and password of the router, you have to reset it to the default settings. Moreover, when you have connected the router through the 10.0.0.1, the 10.0.0.0.1 wouldn’t exist. It is because of the fact that with the extra period and zero, you can alter the settings, which also includes the IP address. Interestingly, you can use any IP address between 10.0.0.0 and 10.255.255.255. This is the reason that 10.0.0.0.1 doesn’t usually function.
It is always worthwhile to ensure that you buy an Xfinity or Comcast router which is up-to-date. Rental routers provided by the ISPs lack basic features and are slow, which makes your internet surfing experience agonizing.
In the next step, it is crucial for you to select the appropriate channel and frequency when configuring your router. It is a very vital step to fine-tune your router’s performance as any lapses can result in the overlapping of channel frequencies. In most cases, the best channels to use are 1, 6, and 11. However, if you are using a 5GHz router, then there is no need to follow this step.
Steps for Login into Comcast Router:
Perform the below- mentioned three steps carefully, which will enable you to login into your Xfinity Comcast router.
Step 1: Connect your PC with the Comcast Router using an ethernet cable. As a choice, You can also use a wireless connection.
Step 2: Open a web browser and type 10.0.0.1 in the URL or click on this link directly-> http://10.0.0.1. If you see a security warning, then use HTTP instead of HTTP.
Login window like the image should appear.
Step 3: Enter the default username and password to proceed.
You will be redirected to the router’s admin panel, where you can configure and set up the router according to your needs and requirements.
Default Router Login and Password
Most of the router manufacturers use different combinations of usernames and passwords. It’s very difficult to mention all the login credentials; however, below are the ten most common username/password combinations:
| Login | Password |
| admin | admin |
| admin | password |
| admin | [none] |
| [none] | admin |
| [none] | [none] |
| administrator | password |
| administrator | [none] |
| recovery | recovery |
| root | root |
| root | [none]
|
FAQs and Common Queries
1) The IP 10.0.0.1 refused to connect with the Xfinity Router
If you are unable to connect with 10.0.0.1, it could be because the device does not use 10.0.0.1 as it’s the default gateway.
You need to check in your computer with the help of CMD in windows whether any other device in the network is using 10.0.0.1. If you are a MAC user, then you can use the ping command.
You will get a positive result if there are any active devices in the network to receive the ping.
2) The Default Gateway IP “10.0.0.1” is taking too long to respond
This error could be due to any issue with the router hardware or because of power failures and prolonged usage. Check if there are any loose connections and reboot your system.
3) Logs into someone else’s network and shows the wrong SSID. What to do?
This error shows if Comcast is using a single line split into many different areas. To solve this issue:
i. Turf off the WIFI on the device and connect the computer directly with an ethernet cable.
ii. Enter the router’s default IP address, which you can find using the config command.
iii. Now, change the IP address to avoid any conflict.
4) How to access the Xfinity router settings?
Use the default IP address of the router to access the Xfinity settings. Depending upon the router model, the default IP address may vary.
5) How to find the password of my Xfinity WIFI?
You can check the box of the router to find the default password. If you are unable to find it, then perform a 30-30-30 reset, and then enter the default password.